psql is a terminal-based front-end to
PostgreSQL. It enables you to type in
queries interactively, issue them to
PostgreSQL, and see the query results.
Alternatively, input can be from a file. In addition, it provides a
number of meta-commands and various shell-like features to
facilitate writing scripts and automating a wide variety of tasks.
Options
-a --echo-all
Print all nonempty input lines to standard output as they are read.
(This does not apply to lines read interactively.) This is
equivalent to setting the variable ECHO to
all.
-A --no-align
Switches to unaligned output mode. (The default output mode is
otherwise aligned.)
-c command --command=command
Specifies that psql is to execute one
command string, command,
and then exit. This is useful in shell scripts. Start-up files
(psqlrc and ~/.psqlrc) are
ignored with this option.
command must be either
a command string that is completely parsable by the server (i.e.,
it contains no psql-specific features),
or a single backslash command. Thus you cannot mix
SQL and psql
meta-commands with this option. To achieve that, you could
pipe the string into psql, for example:
echo '\x \\ SELECT * FROM foo;' | psql.
(\\ is the separator meta-command.)
If the command string contains multiple SQL commands, they are
processed in a single transaction, unless there are explicit
BEGIN/COMMIT commands included in the
string to divide it into multiple transactions. This is
different from the behavior when the same string is fed to
psql's standard input. Also, only
the result of the last SQL command is returned.
Because of these legacy behaviors, putting more than one command in
the -c string often has unexpected results. It's
better to feed multiple commands to psql's
standard input, either using echo as
illustrated above, or via a shell here-document, for example:
psql <<EOF
\x
SELECT * FROM foo;
EOF
-d dbname --dbname=dbname
Specifies the name of the database to connect to. This is
equivalent to specifying dbname as the first non-option
argument on the command line.
If this parameter contains an = sign, it is treated as a
conninfo string. See Section 31.1 for more information.
-e --echo-queries
Copy all SQL commands sent to the server to standard output as well.
This is equivalent
to setting the variable ECHO to
queries.
-E --echo-hidden
Echo the actual queries generated by \d and other backslash
commands. You can use this to study psql's
internal operations. This is equivalent to
setting the variable ECHO_HIDDEN to on.
-f filename --file=filename
Use the file filename
as the source of commands instead of reading commands interactively.
After the file is processed, psql
terminates. This is in many ways equivalent to the internal
command \i.
If filename is -
(hyphen), then standard input is read until an EOF indication
or \q meta-command. Note however that Readline
is not used in this case (much as if -n had been
specified).
Using this option is subtly different from writing psql
< filename. In general,
both will do what you expect, but using -f
enables some nice features such as error messages with line
numbers. There is also a slight chance that using this option will
reduce the start-up overhead. On the other hand, the variant using
the shell's input redirection is (in theory) guaranteed to yield
exactly the same output you would have received had you entered
everything by hand.
-F separator --field-separator=separator
Use separator as the
field separator for unaligned output. This is equivalent to
\pset fieldsep or \f.
-h hostname --host=hostname
Specifies the host name of the machine on which the
server is running. If the value begins
with a slash, it is used as the directory for the Unix-domain
socket.
-H --html
Turn on HTML tabular output. This is
equivalent to \pset format html or the
\H command.
-l --list
List all available databases, then exit. Other non-connection
options are ignored. This is similar to the internal command
\list.
-L filename --log-file=filename
Write all query output into file filename, in addition to the
normal output destination.
-n --no-readline
Do not use Readline for line editing and do
not use the command history.
This can be useful to turn off tab expansion when cutting and pasting.
-o filename --output=filename
Put all query output into file filename. This is equivalent to
the command \o.
-p port --port=port
Specifies the TCP port or the local Unix-domain
socket file extension on which the server is listening for
connections. Defaults to the value of the PGPORT
environment variable or, if not set, to the port specified at
compile time, usually 5432.
-P assignment --pset=assignment
Specifies printing options, in the style of
\pset. Note that here you
have to separate name and value with an equal sign instead of a
space. For example, to set the output format to LaTeX, you could write
-P format=latex.
-q --quiet
Specifies that psql should do its work
quietly. By default, it prints welcome messages and various
informational output. If this option is used, none of this
happens. This is useful with the -c option.
This is equivalent to setting the variable QUIET
to on.
-R separator --record-separator=separator
Use separator as the
record separator for unaligned output. This is equivalent to the
\pset recordsep command.
-s --single-step
Run in single-step mode. That means the user is prompted before
each command is sent to the server, with the option to cancel
execution as well. Use this to debug scripts.
-S --single-line
Runs in single-line mode where a newline terminates an SQL command, as a
semicolon does.
Note: This mode is provided for those who insist on it, but you are not
necessarily encouraged to use it. In particular, if you mix
SQL and meta-commands on a line the order of
execution might not always be clear to the inexperienced user.
-t --tuples-only
Turn off printing of column names and result row count footers,
etc. This is equivalent to the \t command.
-T table_options --table-attr=table_options
Specifies options to be placed within the
HTML table tag. See
\pset for details.
-U username --username=username
Connect to the database as the user username instead of the default.
(You must have permission to do so, of course.)
Perform a variable assignment, like the \set
internal command. Note that you must separate name and value, if
any, by an equal sign on the command line. To unset a variable,
leave off the equal sign. To just set a variable without a value,
use the equal sign but leave off the value. These assignments are
done during a very early stage of start-up, so variables reserved
for internal purposes might get overwritten later.
-V --version
Print the psql version and exit.
-w --no-password
Never issue a password prompt. If the server requires password
authentication and a password is not available by other means
such as a .pgpass file, the connection
attempt will fail. This option can be useful in batch jobs and
scripts where no user is present to enter a password.
Note that this option will remain set for the entire session,
and so it affects uses of the meta-command
\connect as well as the initial connection attempt.
-W --password
Force psql to prompt for a
password before connecting to a database.
This option is never essential, since psql
will automatically prompt for a password if the server demands
password authentication. However, psql
will waste a connection attempt finding out that the server wants a
password. In some cases it is worth typing -W to avoid
the extra connection attempt.
Note that this option will remain set for the entire session,
and so it affects uses of the meta-command
\connect as well as the initial connection attempt.
-x --expanded
Turn on the expanded table formatting mode. This is equivalent to the
\x command.
-X, --no-psqlrc
Do not read the start-up file (neither the system-wide
psqlrc file nor the user's
~/.psqlrc file).
-1 --single-transaction
When psql executes a script with the
-f option, adding this option wraps
BEGIN/COMMIT around the script to execute it
as a single transaction. This ensures that either all the commands
complete successfully, or no changes are applied.
If the script itself uses BEGIN, COMMIT,
or ROLLBACK, this option will not have the desired
effects.
Also, if the script contains any command that cannot be executed
inside a transaction block, specifying this option will cause that
command (and hence the whole transaction) to fail.
-? --help
Show help about psql command line
arguments, and exit.
Exit Status
psql returns 0 to the shell if it
finished normally, 1 if a fatal error of its own occurs (e.g. out of memory,
file not found), 2 if the connection to the server went bad
and the session was not interactive, and 3 if an error occurred in a
script and the variable ON_ERROR_STOP was set.
Usage
Connecting to a Database
psql is a regular
PostgreSQL client application. In order
to connect to a database you need to know the name of your target
database, the host name and port number of the server, and what user
name you want to connect as. psql can be
told about those parameters via command line options, namely
-d, -h, -p, and
-U respectively. If an argument is found that does
not belong to any option it will be interpreted as the database name
(or the user name, if the database name is already given). Not all
of these options are required; there are useful defaults. If you omit the host
name, psql will connect via a Unix-domain socket
to a server on the local host, or via TCP/IP to localhost on
machines that don't have Unix-domain sockets. The default port number is
determined at compile time.
Since the database server uses the same default, you will not have
to specify the port in most cases. The default user name is your
operating-system user name, as is the default database name.
Note that you cannot
just connect to any database under any user name. Your database
administrator should have informed you about your access rights.
When the defaults aren't quite right, you can save yourself
some typing by setting the environment variables
PGDATABASE, PGHOST,
PGPORT and/or PGUSER to appropriate
values. (For additional environment variables, see Section 31.13.) It is also convenient to have a
~/.pgpass file to avoid regularly having to type in
passwords. See Section 31.14 for more information.
An alternative way to specify connection parameters is in a
conninfo string, which is used instead of a
database name. This mechanism give you very wide control over the
connection. For example:
$ psql "service=myservice sslmode=require"
This way you can also use LDAP for connection parameter lookup as
described in Section 31.16.
See Section 31.1 for more information on all the
available connection options.
If the connection could not be made for any reason (e.g., insufficient
privileges, server is not running on the targeted host, etc.),
psql will return an error and terminate.
If at least one of standard input or standard output are a
terminal, then psql sets the client
encoding to "auto", which will detect the
appropriate client encoding from the locale settings
(LC_CTYPE environment variable on Unix systems).
If this doesn't work out as expected, the client encoding can be
overridden using the environment
variable PGCLIENTENCODING.
Entering SQL Commands
In normal operation, psql provides a
prompt with the name of the database to which
psql is currently connected, followed by
the string =>. For example:
$ psql testdb
psql (9.1.24lts2)
Type "help" for help.
testdb=>
At the prompt, the user can type in SQL commands.
Ordinarily, input lines are sent to the server when a
command-terminating semicolon is reached. An end of line does not
terminate a command. Thus commands can be spread over several lines for
clarity. If the command was sent and executed without error, the results
of the command are displayed on the screen.
Whenever a command is executed, psql also polls
for asynchronous notification events generated by
LISTEN and
NOTIFY.
Meta-Commands
Anything you enter in psql that begins
with an unquoted backslash is a psql
meta-command that is processed by psql
itself. These commands make
psql more useful for administration or
scripting. Meta-commands are often called slash or backslash commands.
The format of a psql command is the backslash,
followed immediately by a command verb, then any arguments. The arguments
are separated from the command verb and each other by any number of
whitespace characters.
To include whitespace into an argument you can quote it with a
single quote. To include a single quote into such an argument,
use two single quotes. Anything contained in single quotes is
furthermore subject to C-like substitutions for
\n (new line), \t (tab),
\digits (octal), and
\xdigits (hexadecimal).
If an unquoted argument begins with a colon (:),
it is taken as a psql variable and the value of the
variable is used as the argument instead. If the variable name is
surrounded by single quotes (e.g. :'var'), it
will be escaped as an SQL literal and the result will be used as
the argument. If the variable name is surrounded by double quotes,
it will be escaped as an SQL identifier and the result will be used
as the argument.
Arguments that are enclosed in backquotes (`)
are taken as a command line that is passed to the shell. The
output of the command (with any trailing newline removed) is taken
as the argument value. The above escape sequences also apply in
backquotes.
Some commands take an SQL identifier (such as a
table name) as argument. These arguments follow the syntax rules
of SQL: Unquoted letters are forced to
lowercase, while double quotes (") protect letters
from case conversion and allow incorporation of whitespace into
the identifier. Within double quotes, paired double quotes reduce
to a single double quote in the resulting name. For example,
FOO"BAR"BAZ is interpreted as fooBARbaz,
and "A weird"" name" becomes A weird"
name.
Parsing for arguments stops at the end of the line, or when another
unquoted backslash is found. An unquoted backslash
is taken as the beginning of a new meta-command. The special
sequence \\ (two backslashes) marks the end of
arguments and continues parsing SQL commands, if
any. That way SQL and
psql commands can be freely mixed on a
line. But in any case, the arguments of a meta-command cannot
continue beyond the end of the line.
The following meta-commands are defined:
\a
If the current table output format is unaligned, it is switched to aligned.
If it is not unaligned, it is set to unaligned. This command is
kept for backwards compatibility. See \pset for a
more general solution.
\c or \connect [ -reuse-previous=on|off ] [ dbname [ username ] [ host ] [ port ] | conninfo ]
Establishes a new connection to a PostgreSQL
server. The connection parameters to use can be specified either
using a positional syntax, or using conninfo connection
strings as detailed in Section 31.1.
Where the command omits database name, user, host, or port, the new
connection can reuse values from the previous connection. By default,
values from the previous connection are reused except when processing
a conninfo string. Passing a first argument
of -reuse-previous=on
or -reuse-previous=off overrides that default.
When the command neither specifies nor reuses a particular parameter,
the libpq default is used. Specifying any
of dbname,
username,
host or
port
as - is equivalent to omitting that parameter.
If the new connection is successfully made, the previous
connection is closed.
If the connection attempt failed (wrong user name, access
denied, etc.), the previous connection will only be kept if
psql is in interactive mode. When
executing a non-interactive script, processing will
immediately stop with an error. This distinction was chosen as
a user convenience against typos on the one hand, and a safety
mechanism that scripts are not accidentally acting on the
wrong database on the other hand.
Sets the title of any tables being printed as the result of a
query or unset any such title. This command is equivalent to
\pset title title. (The name of
this command derives from "caption", as it was
previously only used to set the caption in an
HTML table.)
\cd [ directory ]
Changes the current working directory to
directory. Without argument, changes
to the current user's home directory.
Tip: To print your current working directory, use \! pwd.
\conninfo
Outputs information about the current database connection.
\copy { table [ ( column_list ) ] | ( query ) }
{ from | to }
{ filename | stdin | stdout | pstdin | pstdout }
[ with ]
[ binary ]
[ oids ]
[ delimiter [ as ] 'character' ]
[ null [ as ] 'string' ]
[ csv
[ header ]
[ quote [ as ] 'character' ]
[ escape [ as ] 'character' ]
[ force quote column_list | * ]
[ force not null column_list ] ]
Performs a frontend (client) copy. This is an operation that
runs an SQL COPY
command, but instead of the server
reading or writing the specified file,
psql reads or writes the file and
routes the data between the server and the local file system.
This means that file accessibility and privileges are those of
the local user, not the server, and no SQL superuser
privileges are required.
The syntax of the command is similar to that of the
SQL COPY
command. Note that, because of this,
special parsing rules apply to the \copy
command. In particular, the variable substitution rules and
backslash escapes do not apply.
\copy ... from stdin | to stdout
reads/writes based on the command input and output respectively.
All rows are read from the same source that issued the command,
continuing until \. is read or the stream
reaches EOF. Output is sent to the same place as
command output. To read/write from
psql's standard input or output, use
pstdin or pstdout. This option is useful
for populating tables in-line within a SQL script file.
Tip: This operation is not as efficient as the SQL
COPY command because all data must pass
through the client/server connection. For large
amounts of data the SQL command might be preferable.
\copyright
Shows the copyright and distribution terms of
PostgreSQL.
For each relation (table, view, index, sequence, or foreign table)
or composite type matching the
pattern, show all
columns, their types, the tablespace (if not the default) and any
special attributes such as NOT NULL or defaults.
Associated indexes, constraints, rules, and triggers are
also shown. For foreign tables, the associated foreign
server is shown as well.
("Matching the pattern" is defined in
Patterns
below.)
The command form \d+ is identical, except that
more information is displayed: any comments associated with the
columns of the table are shown, as is the presence of OIDs in the
table, the view definition if the relation is a view, and the generic
options if the relation is a foreign table.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Note: If \d is used without a
pattern argument, it is
equivalent to \dtvsE which will show a list of
all visible tables, views, sequences and foreign tables.
This is purely a convenience measure.
Lists aggregate functions, together with their
return type and the data types they operate on. If pattern
is specified, only aggregates whose names match the pattern are shown.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Lists tablespaces. If pattern
is specified, only tablespaces whose names match the pattern are shown.
If + is appended to the command name, each object
is listed with its associated permissions.
Lists conversions between character-set encodings.
If pattern
is specified, only conversions whose names match the pattern are
listed.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Shows the descriptions of objects matching the pattern, or of all visible objects if
no argument is given. But in either case, only objects that have
a description are listed.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
"Object" covers aggregates, functions, operators,
types, relations (tables, views, indexes, sequences), large
objects, rules, and triggers. For example:
=> \dd version
Object descriptions
Schema | Name | Object | Description
------------+---------+----------+---------------------------
pg_catalog | version | function | PostgreSQL version string
(1 row)
Descriptions for objects can be created with the COMMENT
SQL command.
Lists default access privilege settings. An entry is shown for
each role (and schema, if applicable) for which the default
privilege settings have been changed from the built-in defaults.
If pattern is
specified, only entries whose role name or schema name matches
the pattern are listed.
The ALTER DEFAULT PRIVILEGES command is used to set
default access privileges. The meaning of the
privilege display is explained under
GRANT.
Lists domains. If pattern
is specified, only domains whose names match the pattern are shown.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
In this group of commands, the letters E,
i, s,
t, and v
stand for foreign table, index, sequence, table, and view,
respectively.
You can specify any or all of
these letters, in any order, to obtain a listing of objects
of these types. For example, \dit lists indexes
and tables. If + is
appended to the command name, each object is listed with its
physical size on disk and its associated description, if any.
If pattern is
specified, only objects whose names match the pattern are listed.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Lists foreign servers (mnemonic: "external
servers").
If pattern is
specified, only those servers whose name matches the pattern
are listed. If the form \des+ is used, a
full description of each server is shown, including the
server's ACL, type, version, and options.
Lists foreign tables (mnemonic: "external tables").
If pattern is
specified, only entries whose table name or schema name matches
the pattern are listed. If the form \det+
is used, generic options are also displayed.
Lists user mappings (mnemonic: "external
users").
If pattern is
specified, only those mappings whose user names match the
pattern are listed. If the form \deu+ is
used, additional information about each mapping is shown.
Caution
\deu+ might also display the user name and
password of the remote user, so care should be taken not to
disclose them.
Lists foreign-data wrappers (mnemonic: "external
wrappers").
If pattern is
specified, only those foreign-data wrappers whose name matches
the pattern are listed. If the form \dew+
is used, the ACL and options of the foreign-data wrapper are
also shown.
Lists functions, together with their arguments, return types, and
function types, which are classified as "agg" (aggregate),
"normal", "trigger", or "window".
To display only functions
of specific type(s), add the corresponding letters a,
n, t, or w to the command.
If pattern is specified, only
functions whose names match the pattern are shown. If the
form \df+ is used, additional information
about each function, including volatility, language, source
code and description, is shown. By default, only user-created
objects are shown; supply a pattern or the S
modifier to include system objects.
Tip: To look up functions taking arguments or returning values of a specific
type, use your pager's search capability to scroll through the
\df output.
Lists text search configurations.
If pattern is specified,
only configurations whose names match the pattern are shown.
If the form \dF+ is used, a full description of
each configuration is shown, including the underlying text search
parser and the dictionary list for each parser token type.
Lists text search dictionaries.
If pattern is specified,
only dictionaries whose names match the pattern are shown.
If the form \dFd+ is used, additional information
is shown about each selected dictionary, including the underlying
text search template and the option values.
Lists text search parsers.
If pattern is specified,
only parsers whose names match the pattern are shown.
If the form \dFp+ is used, a full description of
each parser is shown, including the underlying functions and the
list of recognized token types.
Lists text search templates.
If pattern is specified,
only templates whose names match the pattern are shown.
If the form \dFt+ is used, additional information
is shown about each template, including the underlying function names.
Lists database roles. If pattern is specified, only
those roles whose names match the pattern are listed.
(This command is now effectively the same as \du).
If the form \dg+ is used, additional information
is shown about each role, including the comment for each role.
\dl
This is an alias for \lo_list, which shows a
list of large objects.
Lists procedural languages. If pattern
is specified, only languages whose names match the pattern are listed.
By default, only user-created languages
are shown; supply the S modifier to include system
objects. If + is appended to the command name, each
language is listed with its call handler, validator, access privileges,
and whether it is a system object.
Lists schemas (namespaces). If pattern
is specified, only schemas whose names match the pattern are listed.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system objects.
If + is appended to the command name, each object
is listed with its associated permissions and description, if any.
Lists operators with their operand and return types.
If pattern is
specified, only operators whose names match the pattern are listed.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Lists collations.
If pattern is
specified, only collations whose names match the pattern are
listed. By default, only user-created objects are shown;
supply a pattern or the S modifier to
include system objects. If + is appended
to the command name, each collation is listed with its associated
description, if any.
Note that only collations usable with the current database's encoding
are shown, so the results may vary in different databases of the
same installation.
Lists tables, views and sequences with their
associated access privileges.
If pattern is
specified, only tables, views and sequences whose names match the
pattern are listed.
The GRANT and
REVOKE
commands are used to set access privileges. The meaning of the
privilege display is explained under
GRANT.
Lists defined configuration settings. These settings can be
role-specific, database-specific, or both.
role-pattern and
database-pattern are used to select
specific roles and databases to list, respectively. If omitted, or if
* is specified, all settings are listed, including those
not role-specific or database-specific, respectively.
The ALTER ROLE and
ALTER DATABASE
commands are used to define per-role and per-database configuration
settings.
Lists data types.
If pattern is
specified, only types whose names match the pattern are listed.
If + is appended to the command name, each type is
listed with its internal name and size, as well as its allowed values
if it is an enum type.
By default, only user-created objects are shown; supply a
pattern or the S modifier to include system
objects.
Lists database roles. If pattern is specified, only
those roles whose names match the pattern are listed.
If the form \du+ is used, additional information
is shown about each role, including the comment for each role.
Lists installed extensions.
If pattern
is specified, only those extensions whose names match the pattern
are listed.
If the form \dx+ is used, all the objects belonging
to each matching extension are listed.
\e or \edit [filename] [line_number]
If filename is
specified, the file is edited; after the editor exits, its
content is copied back to the query buffer. If no filename is given, the current query
buffer is copied to a temporary file which is then edited in the same
fashion.
The new query buffer is then re-parsed according to the normal
rules of psql, where the whole buffer
is treated as a single line. (Thus you cannot make scripts this
way. Use \i for that.) This means that
if the query ends with (or contains) a semicolon, it is
immediately executed. Otherwise it will merely wait in the
query buffer; type semicolon or \g to send it, or
\r to cancel.
If a line number is specified, psql will
position the cursor on the specified line of the file or query buffer.
Note that if a single all-digits argument is given,
psql assumes it is a line number,
not a file name.
Tip: See under Environment for how to configure and
customize your editor.
\echo text [ ... ]
Prints the arguments to the standard output, separated by one
space and followed by a newline. This can be useful to
intersperse information in the output of scripts. For example:
=> \echo `date`
Tue Oct 26 21:40:57 CEST 1999
If the first argument is an unquoted -n the trailing
newline is not written.
Tip: If you use the \o command to redirect your
query output you might wish to use \qecho
instead of this command.
\ef [function_description [line_number] ]
This command fetches and edits the definition of the named function,
in the form of a CREATE OR REPLACE FUNCTION command.
Editing is done in the same way as for \edit.
After the editor exits, the updated command waits in the query buffer;
type semicolon or \g to send it, or \r
to cancel.
The target function can be specified by name alone, or by name
and arguments, for example foo(integer, text).
The argument types must be given if there is more
than one function of the same name.
If no function is specified, a blank CREATE FUNCTION
template is presented for editing.
If a line number is specified, psql will
position the cursor on the specified line of the function body.
(Note that the function body typically does not begin on the first
line of the file.)
Tip: See under Environment for how to configure and
customize your editor.
\encoding [ encoding ]
Sets the client character set encoding. Without an argument, this command
shows the current encoding.
\f [ string ]
Sets the field separator for unaligned query output. The default
is the vertical bar (|). See also
\pset for a generic way of setting output
options.
\g [ filename ] \g [ |command ]
Sends the current query input buffer to the server, and
optionally stores the query's output in filename or pipes the output
to the shell command command. A bare
\g is virtually equivalent to a semicolon. A
\g with argument is a "one-shot"
alternative to the \o command.
\h or \help[ command ]
Gives syntax help on the specified SQL
command. If command
is not specified, then psql will list
all the commands for which syntax help is available. If
command is an
asterisk (*), then syntax help on all
SQL commands is shown.
Note: To simplify typing, commands that consists of several words do
not have to be quoted. Thus it is fine to type \help
alter table.
\H or \html
Turns on HTML query output format. If the
HTML format is already on, it is switched
back to the default aligned text format. This command is for
compatibility and convenience, but see \pset
about setting other output options.
\i or \includefilename
Reads input from the file filename and executes it as
though it had been typed on the keyboard.
If filename is -
(hyphen), then standard input is read until an EOF indication
or \q meta-command. This can be used to intersperse
interactive input with input from files. Note that Readline behavior
will be used only if it is active at the outermost level.
Note: If you want to see the lines on the screen as they are read you
must set the variable ECHO to
all.
\l (or \list) \l+ (or \list+)
List the names, owners, character set encodings, and access privileges
of all the databases in the server.
If + is appended to the command name, database
sizes, default tablespaces, and descriptions are also displayed.
(Size information is only available for databases that the current
user can connect to.)
\lo_export loidfilename
Reads the large object with OID loid from the database and
writes it to filename. Note that this is
subtly different from the server function
lo_export, which acts with the permissions
of the user that the database server runs as and on the server's
file system.
Tip: Use \lo_list to find out the large object's
OID.
\lo_import filename [ comment ]
Stores the file into a PostgreSQL
large object. Optionally, it associates the given
comment with the object. Example:
foo=> \lo_import '/home/peter/pictures/photo.xcf' 'a picture of me'
lo_import 152801
The response indicates that the large object received object
ID 152801, which can be used to access the newly-created large
object in the future. For the sake of readability, it is
recommended to always associate a human-readable comment with
every object. Both OIDs and comments can be viewed with the
\lo_list command.
Note that this command is subtly different from the server-side
lo_import because it acts as the local user
on the local file system, rather than the server's user and file
system.
\lo_list
Shows a list of all PostgreSQL
large objects currently stored in the database,
along with any comments provided for them.
\lo_unlink loid
Deletes the large object with OID
loid from the
database.
Tip: Use \lo_list to find out the large object's
OID.
\o or \out [ filename ] \o or \out [ |command ]
Arranges to save future query results to the file filename or pipe future results
to the shell command command. If no argument is
specified, the query output is reset to the standard output.
"Query results" includes all tables, command
responses, and notices obtained from the database server, as
well as output of various backslash commands that query the
database (such as \d), but not error
messages.
Tip: To intersperse text output in between query results, use
\qecho.
\p or \print
Print the current query buffer to the standard output.
\password [ username ]
Changes the password of the specified user (by default, the current
user). This command prompts for the new password, encrypts it, and
sends it to the server as an ALTER ROLE command. This
makes sure that the new password does not appear in cleartext in the
command history, the server log, or elsewhere.
\prompt [ text ] name
Prompts the user to set variable name. An optional prompt, text, can be specified. (For multiword
prompts, use single quotes.)
By default, \prompt uses the terminal for input and
output. However, if the -f command line switch is
used, \prompt uses standard input and standard output.
\pset option [ value ]
This command sets options affecting the output of query result tables.
option
indicates which option is to be set. The semantics of
value vary depending
on the selected option. For some options, omitting value causes the option to be toggled
or unset, as described under the particular option. If no such
behavior is mentioned, then omitting
value just results in
the current setting being displayed.
Adjustable printing options are:
border
The value must be a
number. In general, the higher
the number the more borders and lines the tables will have,
but this depends on the particular format. In
HTML format, this will translate directly
into the border=... attribute; in the
other formats only values 0 (no border), 1 (internal dividing lines),
and 2 (table frame) make sense.
columns
Sets the target width for the wrapped format, and also
the width limit for determining whether output is wide enough to
require the pager.
Zero (the default) causes the target width to be controlled by the
environment variable COLUMNS, or the detected screen width
if COLUMNS is not set.
In addition, if columns is zero then the
wrapped format only affects screen output.
If columns is nonzero then file and pipe output is
wrapped to that width as well.
expanded (or x)
If value is specified
it must be either on or off
which will enable or disable expanded mode. If value is omitted the command toggles
between regular and expanded mode.
When expanded mode is enabled, query results
are displayed in two columns, with the column name on the left and
the data on the right. This mode is useful if the data wouldn't fit
on the screen in the normal "horizontal" mode.
fieldsep
Specifies the field separator to be used in unaligned output
format. That way one can create, for example, tab- or
comma-separated output, which other programs might prefer. To
set a tab as field separator, type \pset fieldsep
'\t'. The default field separator is
'|' (a vertical bar).
footer
If value is specified
it must be either on or off
which will enable or disable display of the table footer
(the (n rows) count).
If value is omitted the
command toggles footer display on or off.
format
Sets the output format to one of unaligned,
aligned, wrapped,
html,
latex, or troff-ms.
Unique abbreviations are allowed. (That would mean one letter
is enough.)
unaligned format writes all columns of a row on one
line, separated by the currently active field separator. This
is useful for creating output that might be intended to be read
in by other programs (for example, tab-separated or comma-separated
format).
aligned format is the standard, human-readable,
nicely formatted text output; this is the default.
wrapped format is like aligned but wraps
wide data values across lines to make the output fit in the target
column width. The target width is determined as described under
the columns option. Note that psql will
not attempt to wrap column header titles; therefore,
wrapped format behaves the same as aligned
if the total width needed for column headers exceeds the target.
The html, latex, and troff-ms
formats put out tables that are intended to
be included in documents using the respective mark-up
language. They are not complete documents! (This might not be
so dramatic in HTML, but in LaTeX you must
have a complete document wrapper.)
linestyle
Sets the border line drawing style to one
of ascii, old-ascii
or unicode.
Unique abbreviations are allowed. (That would mean one
letter is enough.)
The default setting is ascii.
This option only affects the aligned and
wrapped output formats.
ascii style uses plain ASCII
characters. Newlines in data are shown using
a + symbol in the right-hand margin.
When the wrapped format wraps data from
one line to the next without a newline character, a dot
(.) is shown in the right-hand margin of the first line,
and again in the left-hand margin of the following line.
old-ascii style uses plain ASCII
characters, using the formatting style used
in PostgreSQL 8.4 and earlier.
Newlines in data are shown using a :
symbol in place of the left-hand column separator.
When the data is wrapped from one line
to the next without a newline character, a ;
symbol is used in place of the left-hand column separator.
unicode style uses Unicode box-drawing characters.
Newlines in data are shown using a carriage return symbol
in the right-hand margin. When the data is wrapped from one line
to the next without a newline character, an ellipsis symbol
is shown in the right-hand margin of the first line, and
again in the left-hand margin of the following line.
When the border setting is greater than zero,
this option also determines the characters
with which the border lines are drawn.
Plain ASCII characters work everywhere, but
Unicode characters look nicer on displays that recognize them.
null
Sets the string to be printed in place of a null value.
The default is to print nothing, which can easily be mistaken for
an empty string. For example, one might prefer \pset null
'(null)'.
numericlocale
If value is specified
it must be either on or off
which will enable or disable display of a locale-specific character
to separate groups of digits to the left of the decimal marker.
If value is omitted the
command toggles between regular and locale-specific numeric output.
pager
Controls use of a pager program for query and psql
help output. If the environment variable PAGER
is set, the output is piped to the specified program.
Otherwise a platform-dependent default (such as
more) is used.
When the pager option is off, the pager
program is not used. When the pager option is
on, the pager is used when appropriate, i.e., when the
output is to a terminal and will not fit on the screen.
The pager option can also be set to always,
which causes the pager to be used for all terminal output regardless
of whether it fits on the screen. \pset pager
without a value
toggles pager use on and off.
recordsep
Specifies the record (line) separator to use in unaligned
output format. The default is a newline character.
tableattr (or T)
Specifies attributes to be placed inside the
HTML table tag in
html output format. This
could for example be cellpadding or
bgcolor. Note that you probably don't want
to specify border here, as that is already
taken care of by \pset border.
If no
value is given,
the table attributes are unset.
title
Sets the table title for any subsequently printed tables. This
can be used to give your output descriptive tags. If no
value is given,
the title is unset.
tuples_only (or t)
If value is specified
it must be either on or off
which will enable or disable tuples-only mode.
If value is omitted the
command toggles between regular and tuples-only output.
Regular output includes extra information such
as column headers, titles, and various footers. In tuples-only
mode, only actual table data is shown.
Illustrations of how these different formats look can be seen in
the Examples section.
Tip: There are various shortcut commands for \pset. See
\a, \C, \H,
\t, \T, and \x.
Note: It is an error to call \pset without any
arguments. In the future this case might show the current status
of all printing options.
\q or \quit
Quits the psql program.
In a script file, only execution of that script is terminated.
\qecho text [ ... ]
This command is identical to \echo except
that the output will be written to the query output channel, as
set by \o.
\r or \reset
Resets (clears) the query buffer.
\s [ filename ]
Print psql's command line history
to filename.
If filename is omitted,
the history is written to the standard output (using the pager if
appropriate). This command is not available
if psql was built
without Readline support.
\set [ name [ value [ ... ] ] ]
Sets the internal variable name to value or, if more than one value
is given, to the concatenation of all of them. If no second
argument is given, the variable is just set with no value. To
unset a variable, use the \unset command.
Valid variable names can contain characters, digits, and
underscores. See the section Variables below for details.
Variable names are case-sensitive.
Although you are welcome to set any variable to anything you
want, psql treats several variables
as special. They are documented in the section about variables.
Note: This command is totally separate from the SQL
command SET.
\sf[+] function_description
This command fetches and shows the definition of the named function,
in the form of a CREATE OR REPLACE FUNCTION command.
The definition is printed to the current query output channel,
as set by \o.
The target function can be specified by name alone, or by name
and arguments, for example foo(integer, text).
The argument types must be given if there is more
than one function of the same name.
If + is appended to the command name, then the
output lines are numbered, with the first line of the function body
being line 1.
\t
Toggles the display of output column name headings and row count
footer. This command is equivalent to \pset
tuples_only and is provided for convenience.
\T table_options
Specifies attributes to be placed within the
table tag in HTML
output format. This command is equivalent to \pset
tableattr table_options.
\timing [ on | off ]
Without parameter, toggles a display of how long each SQL statement
takes, in milliseconds. With parameter, sets same.
\w or \writefilename \w or \write|command
Outputs the current query buffer to the file filename or pipes it to the shell
command command.
\x
Toggles expanded table formatting mode. As such it is equivalent to
\pset expanded.
Lists tables, views and sequences with their
associated access privileges.
If a pattern is
specified, only tables, views and sequences whose names match the
pattern are listed.
This is an alias for \dp ("display
privileges").
\! [ command ]
Escapes to a separate shell or executes the shell command
command. The
arguments are not further interpreted; the shell will see them
as-is.
\?
Shows help information about the backslash commands.
Patterns
The various \d commands accept a pattern parameter to specify the
object name(s) to be displayed. In the simplest case, a pattern
is just the exact name of the object. The characters within a
pattern are normally folded to lower case, just as in SQL names;
for example, \dt FOO will display the table named
foo. As in SQL names, placing double quotes around
a pattern stops folding to lower case. Should you need to include
an actual double quote character in a pattern, write it as a pair
of double quotes within a double-quote sequence; again this is in
accord with the rules for SQL quoted identifiers. For example,
\dt "FOO""BAR" will display the table named
FOO"BAR (not foo"bar). Unlike the normal
rules for SQL names, you can put double quotes around just part
of a pattern, for instance \dt FOO"FOO"BAR will display
the table named fooFOObar.
Whenever the pattern parameter
is omitted completely, the \d commands display all objects
that are visible in the current schema search path — this is
equivalent to using * as the pattern.
(An object is said to be visible if its
containing schema is in the search path and no object of the same
kind and name appears earlier in the search path. This is equivalent to the
statement that the object can be referenced by name without explicit
schema qualification.)
To see all objects in the database regardless of visibility,
use *.* as the pattern.
Within a pattern, * matches any sequence of characters
(including no characters) and ? matches any single character.
(This notation is comparable to Unix shell file name patterns.)
For example, \dt int* displays tables whose names
begin with int. But within double quotes, *
and ? lose these special meanings and are just matched
literally.
A pattern that contains a dot (.) is interpreted as a schema
name pattern followed by an object name pattern. For example,
\dt foo*.*bar* displays all tables whose table name
includes bar that are in schemas whose schema name
starts with foo. When no dot appears, then the pattern
matches only objects that are visible in the current schema search path.
Again, a dot within double quotes loses its special meaning and is matched
literally.
Advanced users can use regular-expression notations such as character
classes, for example [0-9] to match any digit. All regular
expression special characters work as specified in
Section 9.7.3, except for . which
is taken as a separator as mentioned above, * which is
translated to the regular-expression notation .*,
? which is translated to ., and
$ which is matched literally. You can emulate
these pattern characters at need by writing
? for .,
(R+|) for
R*, or
(R|) for
R?.
$ is not needed as a regular-expression character since
the pattern must match the whole name, unlike the usual
interpretation of regular expressions (in other words, $
is automatically appended to your pattern). Write * at the
beginning and/or end if you don't wish the pattern to be anchored.
Note that within double quotes, all regular expression special characters
lose their special meanings and are matched literally. Also, the regular
expression special characters are matched literally in operator name
patterns (i.e., the argument of \do).
Advanced Features
Variables
psql provides variable substitution
features similar to common Unix command shells.
Variables are simply name/value pairs, where the value
can be any string of any length. To set variables, use the
psql meta-command
\set:
testdb=> \set foo bar
sets the variable foo to the value
bar. To retrieve the content of the variable, precede
the name with a colon and use it as the argument of any slash
command:
testdb=> \echo :foo
bar
Note: The arguments of \set are subject to the same
substitution rules as with other commands. Thus you can construct
interesting references such as \set :foo
'something' and get "soft links" or
"variable variables" of Perl
or PHP fame,
respectively. Unfortunately (or fortunately?), there is no way to do
anything useful with these constructs. On the other hand,
\set bar :foo is a perfectly valid way to copy a
variable.
If you call \set without a second argument, the
variable is set, with an empty string as value. To unset (or delete) a
variable, use the command \unset.
psql's internal variable names can
consist of letters, numbers, and underscores in any order and any
number of them. A number of these variables are treated specially
by psql. They indicate certain option
settings that can be changed at run time by altering the value of
the variable or that represent some state of the application. Although
you can use these variables for any other purpose, this is not
recommended, as the program behavior might grow really strange
really quickly. By convention, all specially treated variables
consist of all upper-case letters (and possibly numbers and
underscores). To ensure maximum compatibility in the future, avoid
using such variable names for your own purposes. A list of all specially
treated variables follows.
AUTOCOMMIT
When on (the default), each SQL command is automatically
committed upon successful completion. To postpone commit in this
mode, you must enter a BEGIN or START
TRANSACTION SQL command. When off or unset, SQL
commands are not committed until you explicitly issue
COMMIT or END. The autocommit-off
mode works by issuing an implicit BEGIN for you, just
before any command that is not already in a transaction block and
is not itself a BEGIN or other transaction-control
command, nor a command that cannot be executed inside a transaction
block (such as VACUUM).
Note: In autocommit-off mode, you must explicitly abandon any failed
transaction by entering ABORT or ROLLBACK.
Also keep in mind that if you exit the session
without committing, your work will be lost.
Note: The autocommit-on mode is PostgreSQL's traditional
behavior, but autocommit-off is closer to the SQL spec. If you
prefer autocommit-off, you might wish to set it in the system-wide
psqlrc file or your
~/.psqlrc file.
DBNAME
The name of the database you are currently connected to. This is
set every time you connect to a database (including program
start-up), but can be unset.
ECHO
If set to all, all nonempty input lines are printed
to standard output as they are read. (This does not apply to lines
read interactively.) To select this behavior on program
start-up, use the switch -a. If set to
queries,
psql prints each query to standard output
as it is sent to the server. The switch for this is
-e.
ECHO_HIDDEN
When this variable is set to on and a backslash command
queries the database, the query is first shown.
This feature helps you to study
PostgreSQL internals and provide
similar functionality in your own programs. (To select this behavior
on program start-up, use the switch -E.) If you set
the variable to the value noexec, the queries are
just shown but are not actually sent to the server and executed.
ENCODING
The current client character set encoding.
FETCH_COUNT
If this variable is set to an integer value > 0,
the results of SELECT queries are fetched
and displayed in groups of that many rows, rather than the
default behavior of collecting the entire result set before
display. Therefore only a
limited amount of memory is used, regardless of the size of
the result set. Settings of 100 to 1000 are commonly used
when enabling this feature.
Keep in mind that when using this feature, a query might
fail after having already displayed some rows.
Tip: Although you can use any output format with this feature,
the default aligned format tends to look bad
because each group of FETCH_COUNT rows
will be formatted separately, leading to varying column
widths across the row groups. The other output formats work better.
HISTCONTROL
If this variable is set to ignorespace,
lines which begin with a space are not entered into the history
list. If set to a value of ignoredups, lines
matching the previous history line are not entered. A value of
ignoreboth combines the two options. If
unset, or if set to any other value than those above, all lines
read in interactive mode are saved on the history list.
Note: This feature was shamelessly plagiarized from
Bash.
HISTFILE
The file name that will be used to store the history list. The default
value is ~/.psql_history. For example, putting:
\set HISTFILE ~/.psql_history- :DBNAME
in ~/.psqlrc will cause
psql to maintain a separate history for
each database.
Note: This feature was shamelessly plagiarized from
Bash.
HISTSIZE
The number of commands to store in the command history. The
default value is 500.
Note: This feature was shamelessly plagiarized from
Bash.
HOST
The database server host you are currently connected to. This is
set every time you connect to a database (including program
start-up), but can be unset.
IGNOREEOF
If unset, sending an EOF character (usually
Control+D)
to an interactive session of psql
will terminate the application. If set to a numeric value,
that many EOF characters are ignored before the
application terminates. If the variable is set but has no
numeric value, the default is 10.
Note: This feature was shamelessly plagiarized from
Bash.
LASTOID
The value of the last affected OID, as returned from an
INSERT or \lo_import
command. This variable is only guaranteed to be valid until
after the result of the next SQL command has
been displayed.
ON_ERROR_ROLLBACK
When set to on, if a statement in a transaction block
generates an error, the error is ignored and the transaction
continues. When set to interactive, such errors are only
ignored in interactive sessions, and not when reading script
files. When unset or set to off, a statement in a
transaction block that generates an error aborts the entire
transaction. The error rollback mode works by issuing an
implicit SAVEPOINT for you, just before each command
that is in a transaction block, and then rolling back to the
savepoint if the command fails.
ON_ERROR_STOP
By default, command processing continues after an error. When this
variable is set to on, processing will instead stop
immediately. In interactive mode,
psql will return to the command prompt;
otherwise, psql will exit, returning
error code 3 to distinguish this case from fatal error
conditions, which are reported using error code 1. In either case,
any currently running scripts (the top-level script, if any, and any
other scripts which it may have in invoked) will be terminated
immediately. If the top-level command string contained multiple SQL
commands, processing will stop with the current command.
PORT
The database server port to which you are currently connected.
This is set every time you connect to a database (including
program start-up), but can be unset.
PROMPT1 PROMPT2 PROMPT3
These specify what the prompts psql
issues should look like. See Prompting below.
QUIET
Setting this variable to on is equivalent to the command
line option -q. It is probably not too useful in
interactive mode.
SINGLELINE
Setting this variable to on is equivalent to the command
line option -S.
SINGLESTEP
Setting this variable to on is equivalent to the command
line option -s.
USER
The database user you are currently connected as. This is set
every time you connect to a database (including program
start-up), but can be unset.
VERBOSITY
This variable can be set to the values default,
verbose, or terse to control the verbosity
of error reports.
SQL Interpolation
An additional useful feature of psql
variables is that you can substitute ("interpolate")
them into regular SQL statements.
psql provides special facilities for
ensuring that values used as SQL literals and identifiers are
properly escaped. The syntax for interpolating a value without
any special escaping is again to prepend the variable name with a colon
(:):
testdb=> \set foo 'my_table'
testdb=> SELECT * FROM :foo;
would then query the table my_table. Note that this
may be unsafe: the value of the variable is copied literally, so it can
even contain unbalanced quotes or backslash commands. You must make sure
that it makes sense where you put it.
When a value is to be used as an SQL literal or identifier, it is
safest to arrange for it to be escaped. To escape the value of
a variable as an SQL literal, write a colon followed by the variable
name in single quotes. To escape the value an SQL identifier, write
a colon followed by the variable name in double quotes. The previous
example would be more safely written this way:
testdb=> \set foo 'my_table'
testdb=> SELECT * FROM :"foo";
Variable interpolation will not be performed into quoted
SQL entities.
One possible use of this mechanism is to
copy the contents of a file into a table column. First load the file into a
variable and then proceed as above:
(Note that this still won't work if my_file.txt contains NUL bytes.
psql does not support embedded NUL bytes in variable values.)
Since colons can legally appear in SQL commands, an apparent attempt
at interpolation (such as :name,
:'name', or :"name") is not
changed unless the named variable is currently set. In any case, you
can escape a colon with a backslash to protect it from substitution.
(The colon syntax for variables is standard SQL for
embedded query languages, such as ECPG.
The colon syntax for array slices and type casts are
PostgreSQL extensions, hence the
conflict. The colon syntax for escaping a variable's value as an
SQL literal or identifier is a psql
extension.)
Prompting
The prompts psql issues can be customized
to your preference. The three variables PROMPT1,
PROMPT2, and PROMPT3 contain strings
and special escape sequences that describe the appearance of the
prompt. Prompt 1 is the normal prompt that is issued when
psql requests a new command. Prompt 2 is
issued when more input is expected during command entry, for example
because the command was not terminated with a semicolon or a quote
was not closed.
Prompt 3 is issued when you are running an SQL
COPY FROM STDIN command and you need to type in
a row value on the terminal.
The value of the selected prompt variable is printed literally,
except where a percent sign (%) is encountered.
Depending on the next character, certain other text is substituted
instead. Defined substitutions are:
%M
The full host name (with domain name) of the database server,
or [local] if the connection is over a Unix
domain socket, or
[local:/dir/name],
if the Unix domain socket is not at the compiled in default
location.
%m
The host name of the database server, truncated at the
first dot, or [local] if the connection is
over a Unix domain socket.
%>
The port number at which the database server is listening.
%n
The database session user name. (The expansion of this
value might change during a database session as the result
of the command SET SESSION
AUTHORIZATION.)
%/
The name of the current database.
%~
Like %/, but the output is ~
(tilde) if the database is your default database.
%#
If the session user is a database superuser, then a
#, otherwise a >.
(The expansion of this value might change during a database
session as the result of the command SET SESSION
AUTHORIZATION.)
%R
In prompt 1 normally =,
but ^ if in single-line mode,
or ! if the session is disconnected from the
database (which can happen if \connect fails).
In prompt 2 %R is replaced by a character that
depends on why psql expects more input:
- if the command simply wasn't terminated yet,
but * if there is an unfinished
/* ... */ comment,
a single quote if there is an unfinished quoted string,
a double quote if there is an unfinished quoted identifier,
a dollar sign if there is an unfinished dollar-quoted string,
or ( if there is an unmatched left parenthesis.
In prompt 3 %R doesn't produce anything.
%x
Transaction status: an empty string when not in a transaction
block, or * when in a transaction block, or
! when in a failed transaction block, or ?
when the transaction state is indeterminate (for example, because
there is no connection).
%digits
The character with the indicated octal code is substituted.
%:name:
The value of the psql variable
name. See the
section Variables for details.
%`command`
The output of command, similar to ordinary
"back-tick" substitution.
%[ ... %]
Prompts can contain terminal control characters which, for
example, change the color, background, or style of the prompt
text, or change the title of the terminal window. In order for
the line editing features of Readline to work properly, these
non-printing control characters must be designated as invisible
by surrounding them with %[ and
%]. Multiple pairs of these can occur within
the prompt. For example:
results in a boldfaced (1;) yellow-on-black
(33;40) prompt on VT100-compatible, color-capable
terminals.
To insert a percent sign into your prompt, write
%%. The default prompts are
'%/%R%# ' for prompts 1 and 2, and
'>> ' for prompt 3.
Note: This feature was shamelessly plagiarized from
tcsh.
Command-Line Editing
psql supports the Readline
library for convenient line editing and retrieval. The command
history is automatically saved when psql
exits and is reloaded when
psql starts up. Tab-completion is also
supported, although the completion logic makes no claim to be an
SQL parser. If for some reason you do not like the tab completion, you
can turn it off by putting this in a file named
.inputrc in your home directory:
$if psql
set disable-completion on
$endif
(This is not a psql but a
Readline feature. Read its documentation
for further details.)
Environment
COLUMNS
If \pset columns is zero, controls the
width for the wrapped format and width for determining
if wide output requires the pager.
PAGER
If the query results do not fit on the screen, they are piped
through this command. Typical values are
more or less. The default
is platform-dependent. The use of the pager can be disabled by
using the \pset command.
Editor used by the \e and
\ef commands. The variables are examined in
the order listed; the first that is set is used.
The built-in default editors are vi on Unix
systems and notepad.exe on Windows systems.
PSQL_EDITOR_LINENUMBER_ARG
When \e or \ef is used
with a line number argument, this variable specifies the
command-line argument used to pass the starting line number to
the user's editor. For editors such as Emacs or
vi, this is a plus sign. Include a trailing
space in the value of the variable if there needs to be space
between the option name and the line number. Examples:
The default is + on Unix systems
(corresponding to the default editor vi,
and useful for many other common editors); but there is no
default on Windows systems.
SHELL
Command executed by the \! command.
TMPDIR
Directory for storing temporary files. The default is
/tmp.
This utility, like most other PostgreSQL utilities,
also uses the environment variables supported by libpq
(see Section 31.13).
Files
Unless it is passed an -X
or -c option,
psql attempts to
read and execute commands from the system-wide
psqlrc file and the user's
~/.psqlrc file before starting up.
(On Windows, the user's startup file is named
%APPDATA%\postgresql\psqlrc.conf.)
See PREFIX/share/psqlrc.sample
for information on setting up the system-wide file. It could be used
to set up the client or the server to taste (using the \set
and SET commands).
Both the system-wide psqlrc file and the user's
~/.psqlrc file can be made version-specific
by appending a dash and the PostgreSQL
release number, for example ~/.psqlrc-9.1.24lts2.
A matching version-specific file will be read in preference to a
non-version-specific file.
The command-line history is stored in the file
~/.psql_history, or
%APPDATA%\postgresql\psql_history on Windows.
Notes
In an earlier life psql allowed the
first argument of a single-letter backslash command to start
directly after the command, without intervening whitespace.
As of PostgreSQL 8.4 this is no
longer allowed.
psql is only guaranteed to work smoothly
with servers of the same version. That does not mean other combinations
will fail outright, but subtle and not-so-subtle problems might come
up. Backslash commands are particularly likely to fail if the
server is of a newer version than psql itself. However,
backslash commands of the \d family should work with
servers of versions back to 7.4, though not necessarily with servers
newer than psql itself.
Notes for Windows Users
psql is built as a "console
application". Since the Windows console windows use a different
encoding than the rest of the system, you must take special care
when using 8-bit characters within psql.
If psql detects a problematic
console code page, it will warn you at startup. To change the
console code page, two things are necessary:
Set the code page by entering cmd.exe /c chcp
1252. (1252 is a code page that is appropriate for
German; replace it with your value.) If you are using Cygwin,
you can put this command in /etc/profile.
Set the console font to Lucida Console, because the
raster font does not work with the ANSI code page.
Examples
The first example shows how to spread a command over several lines of
input. Notice the changing prompt:
testdb=> CREATE TABLE my_table (
testdb(> first integer not null default 0,
testdb(> second text)
testdb-> ;
CREATE TABLE
Now look at the table definition again:
testdb=> \d my_table
Table "my_table"
Attribute | Type | Modifier
-----------+---------+--------------------
first | integer | not null default 0
second | text |
Now we change the prompt to something more interesting:
Let's assume you have filled the table with data and want to take a
look at it:
peter@localhost testdb=> SELECT * FROM my_table;
first | second
-------+--------
1 | one
2 | two
3 | three
4 | four
(4 rows)
You can display tables in different ways by using the
\pset command:
peter@localhost testdb=> \pset border 2
Border style is 2.
peter@localhost testdb=> SELECT * FROM my_table;
+-------+--------+
| first | second |
+-------+--------+
| 1 | one |
| 2 | two |
| 3 | three |
| 4 | four |
+-------+--------+
(4 rows)
peter@localhost testdb=> \pset border 0
Border style is 0.
peter@localhost testdb=> SELECT * FROM my_table;
first second
----- ------
1 one
2 two
3 three
4 four
(4 rows)
peter@localhost testdb=> \pset border 1
Border style is 1.
peter@localhost testdb=> \pset format unaligned
Output format is unaligned.
peter@localhost testdb=> \pset fieldsep ","
Field separator is ",".
peter@localhost testdb=> \pset tuples_only
Showing only tuples.
peter@localhost testdb=> SELECT second, first FROM my_table;
one,1
two,2
three,3
four,4
Alternatively, use the short commands:
peter@localhost testdb=> \a \t \x
Output format is aligned.
Tuples only is off.
Expanded display is on.
peter@localhost testdb=> SELECT * FROM my_table;
-[ RECORD 1 ]-
first | 1
second | one
-[ RECORD 2 ]-
first | 2
second | two
-[ RECORD 3 ]-
first | 3
second | three
-[ RECORD 4 ]-
first | 4
second | four